TIPM Fuel Pump Relay Bypass/Test Cable Kit:Most 2007-2016 Dodge/Chrysler/Jeep/VW


Item condition:
New
Ended:
Oct 22, 22:20 PDT
Price:
$16.99 View item
Shipping:
FREE
Item location:
Bridgeport,WV,USA
Ships to:
Worldwide
Item specifics
  • Manufacturer Part Number:
    TIPM-Kit-Mini
  • Brand:
    Vertical Visions

Our custom mini-blade TIPM test/bypass cable kits are an inexpensive solution to test and bypass faulty fuel pump relay problems on many 2007 and newer Dodge/Jeep/Chrysler/VW vehicles.  Please see the applicable vehicle list below.  If your vehicle acts like it's out of gas and/or your fuel pump continues pumping after turning the vehicle off (draining your battery), you likely have a faulty fuel pump relay.  Starting problems related to a faulty fuel pump relay typically occur in the morning when the vehicle is cold and progressively get worse over a period of weeks or months.  See our applicable vehicle list below to confirm your vehicle year/make/model.  Fuel pump relays are soldered to one of six circuit boards located deep inside your fuse box, so they are very difficult to access and change.  Our cables work by providing power to the fuel pump from an alternate power source (the M37 run/start fuse slot), which permits the vehicle to start when a defective fuel pump relay is present.  Users simply need to plug their cable into two fuse slots.  Our cables also permit the fuel pump to be powered on when the vehicle is off, which often allows you to narrow down the problem to the TIPM by eliminating the fuel pump as the problem.  But the most common use of this cable is to bypass the problem and continue driving as you normally would, without spending $1000+ on a new TIPM from your dealer.  We invented this cable in 2014 and tens of thousands are in use around the world.  We also have other devices (some are patented) to bypass and test fuel pump relays.  

Kit Contents

Since it can be difficult to locate add-a-circuit cables that can accommodate 20 amps, we sell a kit that will allow you to build your own TIPM Simple Bypass/Test Cable with mini-blade fuses. In less than 5 minutes, you can crimp both add-a-circuit cables together or solder them (preferred). This kit consists of the following items that will build our "Simple" TIPM bypass/test...

View more info...