Downstream O2 Oxygen Sensor for 99-03 Lexus RX300 /01-03 Toyota Highlander 3.0L
- Item condition:
- New
- Ended:
- Oct 3, 22:10 PDT
- Price:
- $18.69 View item
- Shipping:
- FREE
- Item location:
- Richardson,TX,USA
- Ships to:
- Worldwide
Item specifics
-
- Other Part Number:
- 24567, 13338, ES20202
-
- Number of Pieces:
- 1
-
- Fitment Type:
- Direct Replacement
-
- Superseded Part Number:
- 24567, 13338, ES20202
-
- Country/Region of Manufacture:
- China
-
- Interchange Part Number:
- 24567, 13338, ES20202
-
- Placement on Vehicle:
- Right
-
- Fits Vehicle:
- For 99-03 Lexus RX300 /Toyota Highlander Supra 3.0L
-
- Manufacturer Part Number:
- Does not apply
-
- Brand:
- Reach
-
- Warranty:
- 5 Year
-
- Type:
- Oxygen Sensor
-
- UPC:
- Does not apply
Store Categories
Store Categories
- Oxygen Sensor
- Variable Valve Timing
- Window Switch
- Exhaust Gas Temperature Sensor
- Mass Air Flow Sensor Meter
- Ignition coils
- Nitrogen Oxides Nox Sensor
- Trunk Lift Hatch Tailgate Lock
- Radiator Spectra
- Other
Product Description
Specification:
* Line length:500mm
* 4 wire configuration
* Interchange Part Number: 234-4215
*Recommended use: OE Replacement
* Package Include 1 x Oxygen Sensor
Warranty: 5year unlimited miles.
Must Know Before Buying:
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
How to install an oxygen sensor
Notice:
Upstream location is between the catalytic converter and the engine
Downstream location is between the catalytic converter and the tailpipe
Please check fitment notes, pictures and interchange part number for accurate information, and pay more attention to confirm the connector of this item...
