2pcs WHEEL ADAPTERS | 6X5.5 6X139.7 TO 5X130 | 14X1.5 THREAD | 2.0" INCH 50MM
- Item condition:
- New
- Ended:
-
Sep 19, 11:15 PDT
- Shipping:
- FREE
- Item location:
- Fremont,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- Customadeonly
-
- Manufacturer Part Number:
- XOG29350B
-
- Surface Finish:
- Anodized
-
- Bolt Pattern:
- Fit 5x130 Wheels Onto 6x139.7 Hubs
-
- Hub Bore Size:
- 108mm to 71.6mm (Hub Lip)
-
- Interchange Part Number:
- 6X5.5" to 5X130 Wheel Adapters
-
- Material:
- High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
-
- Spacer Type:
- Wheel Adapter With Hub Centric Lip (71.6mm)
-
- Thickness:
- 50mm = 2" Inch Per Side
-
- Thread Type:
- 14x1.5 OR 14MM X 1.5
-
- Vehicle Bolt Pattern::
- 6x5.5" (6x139.7)
-
- Wheel Bolt Pattern::
- 5x130
- Spacer Width: 50mm (2 Inch) each side
- Quantity: 2 Pieces
- Bolt Pattern: Allowing 6X139.7 (Factory Hub) to Fit 5X130 (Wheel)
- Center Bore: 108 to 71.5mm
- Thread Pitch: 14mm X 1.5
- Spacer Type: Wheel Adapters W/ Wheel Centric Lip (71.5mm)
- Pre-assembled With Pressed Grade 8 Studs
- This spacer set includes open end lug nuts to secure the spacers onto your factory hubs
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
- **The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase
View more info...
