4X WHEEL ADAPTERS | 6X135 & 6x5.5 TO 8X170 | 6 LUG TO 8 LUG | 2 Inch w/ LIP
- Item condition:
- New
- Ended:
-
Oct 20, 22:01 PDT
- Shipping:
- FREE
- Item location:
- Fremont,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- Customadeonly
-
- Manufacturer Part Number:
- CV-218-50-2-X2
-
- Hub Bore Size:
- 108mm to 125mm
-
- Spacer Type:
- Wheel Adapters
-
- Thickness:
- 50mm = 2.0" =2 Inch
-
- Thread Type:
- 14x1.5
-
- Wheel Bolt Pattern::
- 8x170
-
- Vehicle Bolt Pattern::
- 6x135
- Spacer Width: 50mm (2Inch) each side
- Quantity: 4 Adapters for 4 Wheels
- Bolt Pattern: Convert Hub 6X5.5 (6X139.7) or 6X135 to fit Wheel 8X170
- Center Bore: 108mm to 125mm
- Thread Pitch: 14X1.5
- Suggested Torque Setting for studs: 95-100 lbs
- Spacer Type: Lug Centric / Conversion Adapter
- This spacer set includes open end lug nuts in 14x1.5 thread pitch to secure the spacers onto your factory hubs. If your vehicle has different threads (for example 14x2). You will need to purchase a set of 14x2 open end lug nuts to complete the installation
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
- **The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase
View more info...
