2003-07 CHEVY CLASSIC BODY STYLE Silverado 1500/2500/3500 FRONT BOWTIE 96181P
- Item condition:
- Time left:
- $34.75 Buy It Now
- Item location:
- Ships to:
- Part Brand:
- ALL SALES
- Surface Finish:
- Manufacturer Part Number:
- Placement on Vehicle:
THIS EMBLEM IS SILVER NOT GOLD
2003-2006 Chevrolet Silverado 1500/2500/3500 WITH BORDER
2007 Chevrolet Classic Body Style 1500 WITH BORDER
Size is 8.5" x 3.25"
It's Made From a Solid Piece of Billet Aluminum POLISHED. This Item Replaces the Factory Gold Emblem. You Must Completely Remove the Factory Emblem to Install This One. This Item Bolts Onto the Grill. These Are Made Out of 100% 6061 T-6 Billet Aluminum.
These Emblems Are Made in The U.S.A.
Access to the emblem On most vehicles you can open the Hood and access the back of the grille without removing anything. On some models you will have to take the plastic panel, which runs the width of the truck, off to allow access to the back of the grille. On these models the panel is held down with screws or plastic clips. The plastic clips have a center piece you "pop" up a /z" with a flat blade screwdriver and then remove the whole clip. There are usually about 8 clips. On a few other models you may have to remove the grille for easier installation. It is usually held in place by several screws.
Old Emblem Removal
The original emblem is held in a couple of different ways. Most of them have 2 push clips over 2 plastic studs that hold it too the grille. Some have a plastic tang on the stud that you have to push to release it. Once you determine which one you have, either remove the clips (this can be difficult using a flat blade screwdriver can help), or push the tangs and remove the old emblem.
Installing the New Emblem
With the new emblem out of the package install the studs (provided) in the threaded holes on the back of the new emblem. DO NOT OVER TIGHTEN THESE AS YOU CAN PULL THE THREADS FROM...