Front Pair Shocks Struts for Lincoln-Mark LT;Ford-Pickup1/2 Ton 4 W.D. 2Pcs
- Item condition:
- New
- Ended:
- Nov 13, 19:55 PDT
- Price:
- $86.99 View item
- Shipping:
- FREE
- Item location:
- Anaheim,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Interchange Part Number:
- 71361L
-
- Adjustable:
- Yes
-
- Manufacturer Part Number:
- Does Not Apply
-
- Placement on Vehicle:
- Front
-
- Brand:
- unitedwheels
-
- Warranty:
- 1 Year
-
- UPC:
- Does not apply
Welcome to Our Store
Description
* Vehicle Fitment Information:
Fits Vehicles of the Following Years
and Make :
2004-2008
Lincoln-Mark LT
Ford-Pickup1/2 Ton 4 W.D.
* HOW TO INSTALL :
Step 1: Before you
lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
Opening brake lines will require bleeding of the brake system.
Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if...