OUC60270 4 Button Key Fob for GMC
- Item condition:
- New
- Ended:
- Feb 2, 07:29 PST
- Price:
- $29.77 View item
- Shipping:
- FREE
- Item location:
- Omaha,NE,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- Unbranded
-
- Manufacturer Part Number:
- OUC60270
-
- Buttons:
- 4 Button
-
- Battery Size:
- CR2032 <B>(sold separately)</b>
-
- Programming:
- You must program this remote to your vehicle.
-
- EAN:
- Does not apply
-
- ISBN:
- Does not apply
Item Details
This is a new aftermarket replacement key fob compatible with GMC models listed below. This product meets our quality standards and is guaranteed to work the same as an original.
Compatibility- 2007-2017 GMC Acadia
- 2003-2017 GMC Savana
- 2007-2014 GMC Sierra
- 2011 GMC Terrain
- 2007-2014 GMC Yukon
NOTE: 2011 & newer vehicles must be programmed by an automotive locksmith or dealership.
Procedure #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.
1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)
2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
Procedure #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.
1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).
2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.
3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE...
