Fits Toyota HYQ1512Y OEM 4 Button Key Fob


Item condition:
Remanufactured
Ended:
Nov 19, 14:03 PST
Price:
$22.77 View item
Shipping:
FREE
Item location:
Omaha,NE,USA
Ships to:
Worldwide
Item specifics
  • Brand:
    Toyota
  • Manufacturer Part Number:
    RSS-210
  • Button Configuration:
    4 Button
  • FCC ID:
    HYQ1512Y
  • Interchange Part Number(s):
    1551-102-578 1551102578
  • Programming:
    You must program this remote to your vehicle.
  • EAN:
    Does not apply
  • ISBN:
    Does not apply

Item Details

This is a Factory OEM (Original Equipment Manufacturer) Toyota 4 Button keyless entry remote, aka "key fob".

OEM electronics in a new aftermarket case.

Compatibility

Toyota

  • 2004 Toyota 4Runner
  • 2003 Toyota 4Runner
  • 2003 Toyota Sequoia
  • 2002 Toyota 4Runner
  • 2002 Toyota Sequoia
  • 2001 Toyota 4Runner
  • 2001 Toyota Sequoia
  • 2000 Toyota 4Runner
  • 1999 Toyota 4Runner
Programming Most remotes can be self-programmed. If these procedures do not work, you must have your remote programmed by a professional automotive locksmith or dealership.   Procedure #1 (03-04 4Runner)

1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.

2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.

4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.

6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B....

View more info...