(2) 2"Wheel Adapters 6X135 Hub to Fit 5x114.3 Wheel 6x135 to 5x4.5 5x114.3 USED
- Item condition:
- Used
- Ended:
-
Oct 6, 15:32 PDT
- Shipping:
- FREE
- Item location:
- Fremont,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Hub Bore Size:
- 87.1mm
-
- Material:
- High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
-
- Bolt Pattern:
- 6X135 (HUB) TO 5X114.3 (WHEEL)
-
- Spacer Type:
- Lug Centric Conversion Wheel Adapters
-
- Surface Finish:
- Anodized
-
- Manufacturer Part Number:
- ZOG26350B-USED
-
- Thickness:
- 50mm or 2 Inches
-
- Thread Type:
- 12X1.5 Or 12mm x 1.5
-
- Wheel Bolt Pattern::
- 5x4.5" (5x114.3)
-
- Vehicle Bolt Pattern::
- 6x135
-
- Brand:
- Customadeonly
- Spacer Width: 50mm (2 Inch) each side
- Quantity: 2 Pieces
- Bolt Pattern: 6X135 to 5X114.3
- Center Bore: 87.1mm
- Thread Pitch: 12x1.5
- Spacer Type: Lug Centric Conversion Wheel Adapters
- Pre-assembled With Pressed Grade 8 Studs
- This spacer set includes open end lug nuts to secure the spacers onto your factory hubs(Your vehicle may have different thread size than what is supplied with this listing.)
- If your factory thread size is different from 12X1.5 -You will need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
View more info...
