A/C Compressor for 06-14 Ford Lincoln 07-14 Expedition/ F-150 CO 10905C YC2526
- Item condition:
- New
- Ended:
- Sep 20, 14:10 PDT
- Price:
- $118.99 View item
- Shipping:
- FREE
- Item location:
- Kent,WA,USA
- Ships to:
- Worldwide
Item specifics
-
- Warranty:
- 1 Year
-
- Other Part Number:
- 68192, 78190, 6512617, 6512762
-
- Interchange Part Number:
- 7C3Z19703AA,9L1Z19703A,9L1Z19703B
-
- Manufacturer Part Number:
- F09OG19006
-
- Brand:
- Yitamotor
-
- Placement on Vehicle:
- Front
-
- Other Part Number2:
- 20-11041-AM, 20-21944-AM
-
- Other Part Number3:
- 7C3Z19703AA, 8L3Z19703C, 9C3Z19703A
-
- Other Part Number4:
- 9L3Z19703C, AL1Z19703A, BL3Z19703C
-
- Other Part Number5:
- BL3Z19703D, 8C3Z19703A, A1Z19703B
-
- UPC:
- 644824837307
Document
Description：
Take appropriate safety precautions –
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.
Installation Method
Attention Please:
Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.
3.Drain all the oil from the new compressor and dispose of according to local, state and federal laws.NOTE:if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
4.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5.Install new receiver drier or accumulator and new orifice tube or expansion valve.
6.Evacuate the A/C system for a minimum of one hour.
7.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8.Start engine whit A/C controls on MAX AIR with door and windows open.
9.Add the remaining charge of...
