4pc 2 Inch Hub centric Wheel Adapters 6x135 to 5x135 Use 5 Lug Wheels On 6 Lugs
- Item condition:
- New
- Ended:
-
Feb 10, 15:27 PST
- Shipping:
- FREE
- Item location:
- Fremont,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- Customadeonly
-
- Manufacturer Part Number:
- ZOG28350B-X2
-
- Surface Finish:
- Anodized
-
- Hub Bore Size:
- 87.1mm
-
- Material:
- High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
-
- Bolt Pattern:
- 6X135 TO 6X135
-
- Spacer Type:
- Hub Centric w/ Hub Lip, Lug Centric
-
- Thickness:
- 50mm or 2 Inches
-
- Thread Type:
- 14X2.0 14mm x2.0
-
- Interchange Part Number:
- Allowing 6x135 Hubs to mount wheels in 6x135 bolt pattern
-
- Wheel Bolt Pattern::
- 5x135
-
- Vehicle Bolt Pattern::
- 6x135
- Spacer Width: 50mm (2 Inch) each side
- Quantity: 4 Pieces
- Bolt Pattern: 6X135 (Hub) to 5X135 (wheel)
- Center Bore: 87.1mm
- Thread Pitch: 14X2.0
- Spacer Type: Hub centric WITH Hub lip
- Pre-assembled With Pressed Grade 8 Studs
- This spacer set includes open end lug nuts to secure the spacers onto your factory hubs
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
View more info...
