2002-2009 Dodge Ram 2500 Power Seat Track Rear motor, NEW
- Item condition:
- New
- Ended:
- Feb 3, 12:38 PST
- Price:
- $89.00 View item
- Shipping:
- $8.7
- Item location:
- Richmond Hill,GA,USA
- Ships to:
- Worldwide
Item specifics
-
- Modified Item:
- No
-
- Country/Region of Manufacture:
- Georgia
-
- Custom Bundle:
- No
-
- Manufacturer Part Number:
- DOD2
-
- Placement on Vehicle:
- Left
-
- Brand:
- Two Men One Garage
-
- Non-Domestic Product:
- No
-
- Warranty:
- Yes
Please read the vehicle year and model statement below for fitment of your power seat assembly.
This is a brand new up/down rear vertical replacement motor for 02-05 Dodge Ram 1500 and 03-08 Dodge Ram 2500,3500 trucks with power seats.
It will replace your factory unit. Your electrical connector will plug directly into this motor. This is not used, but brand new. It will work for the rear up/down adjustment motor. The factory rear up down motor casing is all black plastic compared to the white and metal front motor. The shaft is longer than the front up down motor, so please verify the motor you need. Replaces factory part number:
Gen II B
Vertical
8-82992 or L0110344AA01
5609820 or 5719230
If you have a 2006 Ram 1500 or newer, please check the part numbers on your motor against what I have listed above. I have seen some 2006 1500's with different types of motors.
I sell both vertical motors on ebay. If you need the other, please check out my other auctions.
You will have to reuse your tube nut off the old shaft. The factory constant section ring must be removed off the old shaft in order to unscrew the tube nut. The constant section ring is a thick piece of wire that holds a bushing on the end of the shaft. If removing the section ring becomes a problem, you can cut the old shaft close to the motor and unscrew the tube nut from the cut end. This is the method I prefer.
The screw holding the tube nut on the new shaft is left hand thread. A small socket can be used to tighten it, but you might have to spread the ends apart some. This won't affect the operation of the motor assembly.
Detailed install instructions with photos are included.
Please contact me with
any questions.
Refunds: Unit must not be damaged or altered.
