Dodge Ram 1500 / 2500 / 3500 2.5" Leveling Lift Kit and drop bracket 1994-2012

---

Item condition:

New

Ended:

Oct 20, 17:14 PDT

Shipping:

FREE

Item location:

Dayton,OH,USA

Ships to:

Worldwide

Item specifics

• Manufacturer Part Number:

  DR1001-250

• Brand:

  rough-terrain

• Warranty:

  Yes

---

This kit fits the following models:

• 1994-2001 Dodge Ram 1500 4X4
• 1994-2012 Dodge Ram 2500/3500 4X4
• 2006-2012 Dodge Ram 1500/2500/3500 MegaCab 4X4
• THIS KIT DOES NOT FIT 2WD MODELS OR RAM POWER WAGONS.

Dodge Ram 2.5" FRONT Leveling Lift Kit with sway bar drop bracket

STAMPED CUT 1/4" Steel

SEAMLESS TUBING

10.9 GRADE STUDS WHICH IS EQUIVALENT TO OE STUDS STRENGTH

TURN TABLE HIGH FREQUENCY PULSE WELDED WITH

DURABLE POWDER COATED FINISH

PICTURE SHOWING ARE THE ACTUAL ITEMSWINNER WILL RECEIVE 1 X PAIR OF FRONT LEVELING KIT & 6 NUTS TO GO WITH EACH STUD BOLT.ALL PAYPAL TRANSACTIONS MUST BE SHIPPED TO A CONFIRMED ADDRESS ONLY AND PLEASE DO NOT ASK ME TO SHIP TO A NON-CONFIRM ADDRESS AS I WILL NOT EVEN BOTHER TO REPLY.MONEY BACK GUARANTEE .installation instruction for bracket, block the rear tires of the vehicle so that the vehicle is stable and can not roll. With a 15mm socket or end wrench, remove the four (4) 10mm bolts that mount the anti-sway bar to the frame. NOTE: The anti-sway bar will swing free when the bolts are removed. Be sure to support the bar to avoid injury and excessive load on the end-links. Bolt the anti-sway bar drop brackets to the bushing bracket on the anti-sway bar using the 10mm bolts, nuts, and washers provided and a 17mm end wrench and socket. Do not torque the bolts at this time. Bolt the anti-sway bar drop bracket to the frame. Leave the bolts loose enough to allow position adjustment of the anti-sway bar. Adjust anti-sway bar using the slots in the drop bracket so that the end links are vertical. Also check the horizontal position of the anti-sway bar for alignment with the axel.NOTE: If you find that your drop brackets push the end links out of vertical and toward the front of the truck, reverse the direction of the bracket. In that case they will be opposite of the position shown in the picture. Reversing the...

View more info...