LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6
- Item condition:
- New
- Ended:
- Sep 6, 09:53 PDT
- Price:
- $105.99 View item
- Shipping:
- FREE
- Item location:
- Niles,MI,USA
- Ships to:
- Worldwide
Item specifics
-
- Interchange Part Number:
- trunnion
-
- Manufacturer Part Number:
- 25100-8
-
- Brand:
- Michigan Motorsports
-
- UPC:
- Does not apply
Michigan Motorsports Qty-8 LS1 Rocker Arms with Upgraded Trunion Bearings Installed
* See our other listing if you want different quantity and bolts included
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with
a true roller bearing setup is highly recommended. The stock bearings
have a tenancy to fail. These rocker arms are a must have for any
aggressive heads and cam combo and are the same rockers we utilize on
our 1,000 hp Turbo Motor.
We utilize LS rocker arms and install new LS1 rocker arm
retro-fit
trunion kit that replaces the cageless, loose OEM needle bearings and
powdered
metal trunion with a premium 8620 steel alloy trunion and caged roller
bearings
for added durability. The caged
roller
bearings that greatly reduce the possibility of the bearing failure
experienced
with stock LS1 needle bearings, which can send loose needles throughout
the
engine upon failure.
Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 – 4.8/5.3/5.7/6.0/ Engines
This kit includes:
8 LS Series Rocker Arms
8 rocker arm trunnions- LS-type retrofit (installed)
Install
the upgraded rocker arms to the cylinder heads using socket
head cap screws. Be sure to rotate the trunion so that the
flat recess side of the trunion's center hole faces upward (the socket
head cap screw must seat against this recessed flat side of the hole).
Tighten the cap screw to a value of 22 ft-lbs, following the OE
installation procedure.
