2pc 2" Wheel Adapters 6x4.5 to 5x5.5 Fits 5x139.7 Wheels On 6x114.3 Hubs USED
- Item condition:
- Used
- Ended:
-
Oct 14, 18:58 PDT
- Shipping:
- FREE
- Item location:
- Fremont,CA,USA
- Ships to:
- Worldwide
Item specifics
-
- Hub Bore Size:
- 71.5mm
-
- Material:
- High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
-
- Bolt Pattern:
- 6x4.5" to 5x5.5"
-
- Spacer Type:
- Hub Centric without Hub Lip Lug Centric
-
- Surface Finish:
- Anodized
-
- Manufacturer Part Number:
- CV-289-50BU-USED
-
- Thickness:
- 50mm = 2.0 =2 inch
-
- Thread Type:
- 1/2"
-
- Wheel Bolt Pattern::
- 5x5.5" (5x139.7)
-
- Vehicle Bolt Pattern::
- 6x4.5" (6x114.3)
-
- Brand:
- Customadeonly
- Spacer Width 50mm (2 inch) each side
- Quantity 2 Pieces
- Bolt Pattern 6x114.3 to 5x139.7
- Center Bore 71.5mm
- Thread Pitch 1/2"
- Spacer Type Hub centric w/o Hub lip
- Pre-assembled With Pressed Grade 8 Studs
- This spacer set includes open end lug nuts to secure the spacers onto your factory hubs
- Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure
- Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)
- Be sure to retorque the adapters after 20-25 miles of driving
- **The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase
View more info...
