cars near you

A/C AC Compressor W/ Clutch For 2006 2007 2008 Jeep Liberty V6 3.7L 55111400AB

---

Item condition:

New

Ended:

Sep 19, 09:00 PDT

Shipping:

FREE

Item location:

Kent,WA,USA

Ships to:

Worldwide

Item specifics

• Other Part Number:

  255275,275521,2022036,2022036R,17670,140256C,0610177,C1747

• Interchange Part Number:

  55111400AA

• Warranty:

  1 Year

• Manufacturer Part Number:

  E03OG19012

• Brand:

  LEDKINGDOMUS

• Fitment Type:

  Direct Replacement

• Placement on Vehicle:

  Front

• Clutch:

  w/ Clutch

• Pre-filled Oil:

  100ml

• Type:

  A/C Compressor

• Interchange Part Number 1:

  1010900,1110900,1210900,17658,0911A0303, 10360630

• Interchange Part Number 2:

  5512416,6512281,7512281,7512416,10360631

• UPC:

  720524482679

---

AC Compressor w/ Clutch For Jeep Liberty Dodge Nitro V6 3.7L

Item Description:

NOTE: Each AC air compressor comes with 100ML of Oil. You dont need to add oil additionally.

Fit For:

2006 -2008 Jeep Liberty  V6 3.7L
2007- 2008 Dodge Nitro V6 3.7L

Note:

To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

Please make sure the plug is the same as your old one

Installation

Attention Please:

Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.

1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 

2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.

· Flush evaporators from inlet to outlet.

3. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.

4. Next, install the new or remanufactured A/C Compressor.

5. Install and tighten the A/C Compressor mounting bolts.

6. Reconnect any electrical connectors to the A/C Compressor.

7. Re-install the refrigerant lines and A/C belt to the A/C Compressor.

8. Reconnect the negative battery cable.

9. Evacuate the A/C system with an A/C servicing machine for at least one hour.

10. Check the system for leaks.

11. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly...

View more info...