Fits Mitsubishi G8D-525M-A OEM 2 Button Key Fob
- Item condition:
- Remanufactured
- Ended:
- Jan 13, 14:39 PST
- Price:
- $11.77 View item
- Shipping:
- FREE
- Item location:
- Omaha,NE,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- Mitsubishi
-
- Manufacturer Part Number:
- G8D-525M-A
-
- Button Configuration:
- 2 Button
-
- FCC ID:
- OUCG8D-525M-A
-
- Interchange Part Number(s):
- 850104241A
-
- Programming:
- You must program this remote to your vehicle.
-
- EAN:
- Does not apply
-
- ISBN:
- Does not apply
Item Details
This is a Factory OEM (Original Equipment Manufacturer) Mitsubishi 2 Button keyless entry remote, aka "key fob".
Genuine OEM electronics in a new aftermarket case.
CompatibilityMitsubishi
- 2000-2005 Mitsubishi Eclipse
- 2002-2007 Mitsubishi Lancer
- 1997-2004 Mitsubishi Montero Sport
- 2003-2006 Mitsubishi Outlander
Diagram of Data Link Connector (DLC)
Obtain all remote transmitters for this vehicle. This procedure's a little more complicated than others, we recommend having someone help you perform this procedure. We have found it easier to have one person manage the jumper wire while the second person performs the procedure. Please understand: We don't write these procedures or design these cars. We simply provide the information and pass it along.
- Locate the Data Link Connector (DLC). It will be under the dash on the drivers side. You may need to lay on the floor and look up to easily access it. Use the diagram above to identify ports 1 and 4. Notice that the DLC connector is tapered. You can use this to help identify the proper ports. Be sure there's metal contact pins in ports 1 and 4.
- Insert key into the ignition and leave in the OFF position.
- Using a suitable jumper wire, jump pin 1 to pin 4. Jump means to make a connection between the two pins using any metal wire. A paperclip bent in the shape of a 'U' usually works perfect. Be certain the jumper wire makes contact with the pins in ports 1 and 4. Once the jumper wire is installed it needs to remain there throughout this procedure until instructed to remove.
- Within ten seconds of connecting the jumper wire, press the hazard light switch 6 times. The doors will automatically lock and unlock once indicating...