Item specifics
-
- Manufacturer Part Number:
- DR1001-200 D-2
-
- Surface Finish:
- BLACK
-
- Warranty:
- Yes
-
- Part Brand:
- ROUGH TERRAIN
Dodge Ram 3" FRONT Leveling Lift Kit: COLOR RED
1994-2012 Dodge 2500 and 3500 4x4 Trucks
1994-2001 Dodge 1500 4x4 Trucks
2006-2010 Dodge Ram 1500/2500/3500 Megacab 4X4
THIS KIT DOES NOT FIT 2WD MODELS.
STRONGEST SOLID CARBON STEEL FOR THE BEST PRICE
STAMPED CUT 1/4" Steel
SEAMLESS TUBING
10.9 GRADE STUDS WHICH IS EQUIVALENT TO OE STUDS STRENGTH
TURN TABLE HIGH FREQUENCY PULSE WELDED WITH
DURABLE POWDER COATED FINISH
PICTURE SHOWING ARE THE ACTUAL ITEMS
WINNER WILL RECEIVE 1 X PAIR OF FRONT LEVELING KIT & 6 NUTS TO GO WITH EACH STUD BOLT.
ALL PAYPAL TRANSACTIONS MUST BE SHIPPED TO A CONFIRMED ADDRESS ONLY AND PLEASE DO NOT ASK ME TO SHIP TO A NON-CONFIRM ADDRESS AS I WILL NOT EVEN BOTHER TO REPLY.
MONEY BACK GUARANTEE ! IF YOU DONT LIKE MY PRODUCT SIMPLEY SEND IT BACK IN 3 DAYS AFTER RECEIVED. BUYER IS RESPONSIBLE FOR THE COST OF RETURN FREIGHT.
INSTALLATION INSTRUCTIONS
FRONT LEVELING KIT FOR DODGE RAMSIMPORTANT NOTES:
A certified mechanic is recommended to perform this installation with proper safety gears.
Use locktite on all bolts related with this installation. Torque settings: 5/16” – 15-18 ft-lbs, 3/8” – 28-32 ft-lbs, 7/16” - 30-35 ft-lbs, 1/2” – 65-85 ft-lbs, 9/16” – 75-90 ft-lbs, 5/8” – 85-110 ft-lbs, 3/4” - 105-125 ft-lbs.INSTALLATION PROCEDURE:
Block the rear tires of the vehicle to prevent rolling backwards. Lift the front of the vehicle and support both left and right frames with jack stands then remove the wheels from both sides.
Insert a floor jack under the front axle and raise the jack until it makes contact with the front axle.
Starting with the driver side, mark on the stock coil spring and another directly across on the stock spring socket. It will allow you to reinstall the coil spring in the same position. Repeat the same procedure on passenger side.
Locate the top of the shock absorber stud that is located in the engine compartment. Remove the shock stud nut, retaining washer and rubber grommet. You will need...
View more info...
